QRコード
QRCODE
お知らせ
アクセスカウンタ
読者登録
メールアドレスを入力して登録する事で、このブログの新着エントリーをメールでお届けいたします。解除は→こちら
現在の読者数 50人

条件を満たす

2018年12月22日

 車馬駄馬田 at 08:00 | Comments(0) |  | しょ
                        目次はこちら

条件を満たす

(SATISFY)
$$ The condition to be satisfied to achieve a broadened spectrum of 3 dB-width Δλ centred on a wavelength λ1 can then be approximated to: ##EQU3## / 波長λ1上に中心がある3dB幅Δλの拡張したスペクトルを実現するために満足すべき条件は、次式(3)により近似値を求めることができる。(USP6339664)

$$ If the condition is satisfied, then the normal branch source operands are read and a branch is executed. (USP6100905)

$$ Referring to FIG. 7, it was shown that each table may have a maximum of six indexes within the particular embodiment, although this figure may be adjusted in order to satisfy particular local operating conditions. / 図7を参照すると、各表は特定の実施形態内に最大の6個のインデックスを有して示されているが、この形態は特定のローカルな動作条件を満足させるために調節されてもよい。(USP6182079)

$$ By setting upper and lower amplitude threshold curves 50, 51, as shown, bursts can be accepted as satisfying the amplitude condition providing the burst amplitudes fall between the curves. / 上側と下側との振幅しきい値を、図示のように、設定することにより、バーストは振幅条件を満足されるものとして受入れ可能となるが、その条件はバースト振幅が二つの曲線の間に入ることとなる。(USP6826982)

(MEET)
$$ In this manner, modification of the trigger condition only occurs when the first trigger condition is met. / この方法において、第1のトリガー条件が満たされている時には、トリガー条件の修正が生じるだけである。(USP8676533)

$$ The positions of the zoom lenses to meet this condition can then be determined using standard textbook geometric optic equations for zoom lenses. / したがって、この条件を満たすズームレンズの位置は、ズームレンズに関する標準教科書の幾何光学の等式を使用して決定できる。(USP8294977)

$$ In order to meet the criteria for uniform quenching of a single object or component it is necessary for the quenchant to reach the surface of the object uniformly. / 単一の物体又は成分の均一急冷の条件を満たすためには、急冷剤が物体表面に均一に到達することが必要である。(USPA01020503)


                        目次はこちら



同じカテゴリー()の記事
 用法 / 使用法 (2020-07-16 08:00)
 要部 / 主要部 (2020-07-15 08:00)
 深さ / 深度 / 奥行き (2020-03-01 08:00)
 前記のような / 上記のような (2019-03-17 08:00)
 侵入 (2019-01-24 08:00)
 侵食 (2019-01-23 08:00)

※このブログではブログの持ち主が承認した後、コメントが反映される設定です。
上の画像に書かれている文字を入力して下さい
 
<ご注意>
書き込まれた内容は公開され、ブログの持ち主だけが削除できます。