GAP 隙間・空隙・間隙
目次はこちら
GAP 隙間・空隙・間隙
RT: aperture, duct, opening, slit, slot
$$ This is simply achieved by driving the wedge further to close any gaps that arise through wear. / これは、摩耗によって生じる隙間を閉鎖するようにくさびをさらに推進することによって簡単に達成される。(USP7090586)
$$ More particularly, in a typical machine the radial inner or outer ends of the passageways will adjoin with the air gap between the rotor and stator. / 詳述すれば、典型的な機械においては、各通路の半径方向の内端又は外端が、ロータとステータの間の間隙と隣接するように配置される。(USP6815848)
$$ This gap will therefore be a function of the microwave wavelength and typically will be a multiple of λ/4 where λ is the wavelength of the microwave radiation. / それ故､この間隙は､マイクロ波の波長の機能があり､典型的には､λをマイクロ波放射の波長とすると､λ／４の倍数である｡(USP6507030)
$$ The gap 76 between parts 71, 72 can act as an air vent and oil drain. / 部品７１，７２の間の隙間７６は､空気ベントおよびオイルドレンとして作用する｡(USP6296462)
$$ If the gap between the prism and the modulating surface of negative dielectric is too great, then there is no coupling and the incident wavefront is reflected from the internal surface of the prism. / プリズムと負誘電体の変調表面間の空隙が過大である場合､結合は生成されず､入射波面はプリズムの内側表面から反射される｡(USP6278541)
$$ The use of a softer material at the surface of the device allows for the surface to deform to conform to the tissue at the incision, thereby minimising any gap between the device and the tissue. / 器械の表面におけるより柔らかな材料の使用は､表面が切開部の組織と一致するように変形でき､これにより器械と組織との間の間隙を最小にする｡(USP6186974)
$$ The length(s) of busbar strip adjacent the corner may overlap or be overlapped by the separate corner piece of busbar strip, or may be juxtaposed the corner piece with or without a gap between the adjacent length and the separate piece. (USP6185812)隙間をもってまたは隙間なく
$$ Karabiners generally comprise a C-shaped body with its ends curved towards each other and forming a gap closed by a spring loaded gate pivotally mounted on one body end and urged into engagement with the other body end. (USP02050032)
目次はこちら
GAP 隙間・空隙・間隙
RT: aperture, duct, opening, slit, slot
$$ This is simply achieved by driving the wedge further to close any gaps that arise through wear. / これは、摩耗によって生じる隙間を閉鎖するようにくさびをさらに推進することによって簡単に達成される。(USP7090586)
$$ More particularly, in a typical machine the radial inner or outer ends of the passageways will adjoin with the air gap between the rotor and stator. / 詳述すれば、典型的な機械においては、各通路の半径方向の内端又は外端が、ロータとステータの間の間隙と隣接するように配置される。(USP6815848)
$$ This gap will therefore be a function of the microwave wavelength and typically will be a multiple of λ/4 where λ is the wavelength of the microwave radiation. / それ故､この間隙は､マイクロ波の波長の機能があり､典型的には､λをマイクロ波放射の波長とすると､λ／４の倍数である｡(USP6507030)
$$ The gap 76 between parts 71, 72 can act as an air vent and oil drain. / 部品７１，７２の間の隙間７６は､空気ベントおよびオイルドレンとして作用する｡(USP6296462)
$$ If the gap between the prism and the modulating surface of negative dielectric is too great, then there is no coupling and the incident wavefront is reflected from the internal surface of the prism. / プリズムと負誘電体の変調表面間の空隙が過大である場合､結合は生成されず､入射波面はプリズムの内側表面から反射される｡(USP6278541)
$$ The use of a softer material at the surface of the device allows for the surface to deform to conform to the tissue at the incision, thereby minimising any gap between the device and the tissue. / 器械の表面におけるより柔らかな材料の使用は､表面が切開部の組織と一致するように変形でき､これにより器械と組織との間の間隙を最小にする｡(USP6186974)
$$ The length(s) of busbar strip adjacent the corner may overlap or be overlapped by the separate corner piece of busbar strip, or may be juxtaposed the corner piece with or without a gap between the adjacent length and the separate piece. (USP6185812)隙間をもってまたは隙間なく
$$ Karabiners generally comprise a C-shaped body with its ends curved towards each other and forming a gap closed by a spring loaded gate pivotally mounted on one body end and urged into engagement with the other body end. (USP02050032)
目次はこちら