MASS / 質量・塊
2013年07月26日
目次はこちら
MASS / 質量・塊
$$ The reaction mass was then poured into a 10% w/w aqueous solution of sodium sulphite (50 ml) and allowed to stand. / 次いで、この反応塊を亜硫酸ソーダの１０ｗ／ｗ％水溶液（50mL）中に注ぎ、そして放置した。(USP03027873)
$$ By this means the mass on the suspension system is reduced for increased sensitivity. / この手段によって、懸架システムにおける質量が感度を増大させるべく低減されている。(USP02174556)
$$ The particulate is collected by impingement on a baffle plate, 6, and is shown by mass, 7. / 粒子状物質は、そらせ板６に衝突することにより収集され、固まり７で示されている。(USP6889498)
$$ The final composition may employ from 5 to 25 mass %, preferably 5 to 18 mass %, typically 10 to 15 mass % of the concentrate, the remainder being oil of lubricating viscosity. (USP7585821) 質量％
$$ More preferably the preferred dosage is up to 3,000 ppm by mass, more preferably from about 100 ppm to about 2,000 ppm by mass, more preferably from about 300 to about 1,500 ppm by mass, more preferably from 300 to about 1000 ppm by mass of molybdenum. (USP6774091) 質量濃度
$$ Thus, the dispersant inhibitor containing compound which includes zinc dithiophosphate has a phosphorus component of roughly 1 mass %. (USP7598211) 質量％
$$ It contains from 3.5 to 9.0% by mass of a cross-linked acrylamide-methylene-bis-acrylamide copolymer in water. (USP7294348) 質量％
$$ Whereas 1% is equal to 10,000 parts per million (ppm), the preferred dosage in the molybdenum additive is up to 5.0 percent by mass. (USP6774091) 質量％
目次はこちら
MASS / 質量・塊
$$ The reaction mass was then poured into a 10% w/w aqueous solution of sodium sulphite (50 ml) and allowed to stand. / 次いで、この反応塊を亜硫酸ソーダの１０ｗ／ｗ％水溶液（50mL）中に注ぎ、そして放置した。(USP03027873)
$$ By this means the mass on the suspension system is reduced for increased sensitivity. / この手段によって、懸架システムにおける質量が感度を増大させるべく低減されている。(USP02174556)
$$ The particulate is collected by impingement on a baffle plate, 6, and is shown by mass, 7. / 粒子状物質は、そらせ板６に衝突することにより収集され、固まり７で示されている。(USP6889498)
$$ The final composition may employ from 5 to 25 mass %, preferably 5 to 18 mass %, typically 10 to 15 mass % of the concentrate, the remainder being oil of lubricating viscosity. (USP7585821) 質量％
$$ More preferably the preferred dosage is up to 3,000 ppm by mass, more preferably from about 100 ppm to about 2,000 ppm by mass, more preferably from about 300 to about 1,500 ppm by mass, more preferably from 300 to about 1000 ppm by mass of molybdenum. (USP6774091) 質量濃度
$$ Thus, the dispersant inhibitor containing compound which includes zinc dithiophosphate has a phosphorus component of roughly 1 mass %. (USP7598211) 質量％
$$ It contains from 3.5 to 9.0% by mass of a cross-linked acrylamide-methylene-bis-acrylamide copolymer in water. (USP7294348) 質量％
$$ Whereas 1% is equal to 10,000 parts per million (ppm), the preferred dosage in the molybdenum additive is up to 5.0 percent by mass. (USP6774091) 質量％
目次はこちら
※このブログではブログの持ち主が承認した後、コメントが反映される設定です。