WHICHEVER
2016年10月10日
車馬駄馬田 at 08:00 | Comments(0) | which
目次はこちら
WHICHEVER
-->any
$$ Whichever is monitored in order to detect that change is referred to as a "reporter", whether it is the donor or the acceptor. / 供与体であるか受容体であるかを問わず、この変化を検出するべく監視されるものを「レポーター」と呼んでいる。(USP7652266)
$$ Whichever method is used, an image can now be obtained that will correspond to the topography of the surface, with particular application for metrology. / いずれの方法が使用されても、計測学のための特定の応用例とともに、表面の形状に一致する画像が得られる。(USP7596989)
$$ y may be changed by whichever process sends the data first. (USP6691301)
$$ Whichever method is used to vary the delivered energy, the device can be used at "energy settings" up to about 10 Joules. (USP6629974)
$$ It also enables data transfer to the cache to be transmitted at whichever transfer rate is available. (USP6606033)
$$ In whichever embodiment, it is preferred that any coil which is provided offset to the centre of the drill head lie on or adjacent to the outer surface of the drill. (USP6102137)
$$ Whichever shift method is used, it is preferably operated in indirect heat exchange with a coolant, especially water under pressure. (USP4778670)
目次はこちら
WHICHEVER
-->any
$$ Whichever is monitored in order to detect that change is referred to as a "reporter", whether it is the donor or the acceptor. / 供与体であるか受容体であるかを問わず、この変化を検出するべく監視されるものを「レポーター」と呼んでいる。(USP7652266)
$$ Whichever method is used, an image can now be obtained that will correspond to the topography of the surface, with particular application for metrology. / いずれの方法が使用されても、計測学のための特定の応用例とともに、表面の形状に一致する画像が得られる。(USP7596989)
$$ y may be changed by whichever process sends the data first. (USP6691301)
$$ Whichever method is used to vary the delivered energy, the device can be used at "energy settings" up to about 10 Joules. (USP6629974)
$$ It also enables data transfer to the cache to be transmitted at whichever transfer rate is available. (USP6606033)
$$ In whichever embodiment, it is preferred that any coil which is provided offset to the centre of the drill head lie on or adjacent to the outer surface of the drill. (USP6102137)
$$ Whichever shift method is used, it is preferably operated in indirect heat exchange with a coolant, especially water under pressure. (USP4778670)
目次はこちら
※このブログではブログの持ち主が承認した後、コメントが反映される設定です。