WHICH どの
2016年10月05日
車馬駄馬田 at 08:00 | Comments(0) | which
目次はこちら
WHICH どの
-->according to which;
$$ In use, the sequence in which the above signals are applied determines which valves are actuated. / 使用の際には、上記信号が適用されるシーケンスは、いずれの弁が作動されるかを決定する。(USP7653442)
$$ Which daughter this operation is associated with depends on the transform that led to the extra surface daughter. / この操作がどのドーターに関連つけられているのかは、余分な表面ドーターにつながる変形に依存している。(USP7565281)
$$ When User has selected those he wants to see, marks them and picks them out, the system will tell User which CD-ROM disk to insert. / 見たい物をマークし選択した後に、システムはどのCDディスクを挿入するかを指示する。(USP5559936)
$$ The next stage is to set a "threshold" value which will be used (as described in detail below) to determine which macroblocks should be recoded completely and which should re-use the parameters associated with one or both of the input video signals. / 次の処理段では、閾値の設定を行う。この閾値は、後述するように、どのマクロブロックを完全に再符号化し、どのマクロブロックに対して、入力された映像信号A、Bのいずれか一方又は両方のパラメータを再使用できるかを判定するために使用される。(USP6757333)
$$ The variable MB_ratio determines which of a number of LUTs should be used. / 変数MB_ratioは、複数のLUTのうちどのLUTを使用するかを判定するための変数である。(USP6757333)
$$ This is achieved by determining at the earth station 8 which beam the mobile terminal 18 falls within and allocating a call with the mobile terminal 18 in the appropriate beam. / これは、どのビームに移動端末18が含まれているかを地球局8で判定し、呼を適切なビーム内の移動端末18に割り当てることにより達成される。(USP01046481)
目次はこちら
WHICH どの
-->according to which;
$$ In use, the sequence in which the above signals are applied determines which valves are actuated. / 使用の際には、上記信号が適用されるシーケンスは、いずれの弁が作動されるかを決定する。(USP7653442)
$$ Which daughter this operation is associated with depends on the transform that led to the extra surface daughter. / この操作がどのドーターに関連つけられているのかは、余分な表面ドーターにつながる変形に依存している。(USP7565281)
$$ When User has selected those he wants to see, marks them and picks them out, the system will tell User which CD-ROM disk to insert. / 見たい物をマークし選択した後に、システムはどのCDディスクを挿入するかを指示する。(USP5559936)
$$ The next stage is to set a "threshold" value which will be used (as described in detail below) to determine which macroblocks should be recoded completely and which should re-use the parameters associated with one or both of the input video signals. / 次の処理段では、閾値の設定を行う。この閾値は、後述するように、どのマクロブロックを完全に再符号化し、どのマクロブロックに対して、入力された映像信号A、Bのいずれか一方又は両方のパラメータを再使用できるかを判定するために使用される。(USP6757333)
$$ The variable MB_ratio determines which of a number of LUTs should be used. / 変数MB_ratioは、複数のLUTのうちどのLUTを使用するかを判定するための変数である。(USP6757333)
$$ This is achieved by determining at the earth station 8 which beam the mobile terminal 18 falls within and allocating a call with the mobile terminal 18 in the appropriate beam. / これは、どのビームに移動端末18が含まれているかを地球局8で判定し、呼を適切なビーム内の移動端末18に割り当てることにより達成される。(USP01046481)
目次はこちら
※このブログではブログの持ち主が承認した後、コメントが反映される設定です。