POSITION ＋関係詞
2014年06月08日
車馬駄馬田 at 08:00 | Comments(0) | po...
目次はこちら
POSITION + where, which, wherein, when
$$ FIG. 2b shows the club head 2 adjusted to mid locked position which is equivalent to a 5 iron conventional club. / 図２ｂは従来の５番アイアンのクラブと同等な、中間固定位置に調整されたクラブヘッド２を示す。(USP6110055)
$$ The loader arm may be mounted on the structure at a position which is not more than a predetermined distance above a horizontal plane passing through the highest part of the engine or the engine. (USP5836733)
$$ The two `momentarily` output positions associated with cam wheel 218 are positioned one on either side of the rest position of the output member 120, i.e. the position to which it is biased towards bias spring 124. (USP02073789)
$$ That can be contrasted with the release position wherein when the inside release handle is pulled to that position with the door...(USP02074809)
$$ Once pressure is applied to the gate inwardly, it will open but always spring back to a closed position when the pressure is removed.(USP02050032)
$$ The bridge portion 145 would however be typically left in position where a patient had few upper teeth or no upper teeth at all.(USP6355049)
$$ They may be required to start placing pieces at a starting position which may be equidistant from and parallel with the finishing lines.(USP01054795)
目次はこちら
POSITION + where, which, wherein, when
$$ FIG. 2b shows the club head 2 adjusted to mid locked position which is equivalent to a 5 iron conventional club. / 図２ｂは従来の５番アイアンのクラブと同等な、中間固定位置に調整されたクラブヘッド２を示す。(USP6110055)
$$ The loader arm may be mounted on the structure at a position which is not more than a predetermined distance above a horizontal plane passing through the highest part of the engine or the engine. (USP5836733)
$$ The two `momentarily` output positions associated with cam wheel 218 are positioned one on either side of the rest position of the output member 120, i.e. the position to which it is biased towards bias spring 124. (USP02073789)
$$ That can be contrasted with the release position wherein when the inside release handle is pulled to that position with the door...(USP02074809)
$$ Once pressure is applied to the gate inwardly, it will open but always spring back to a closed position when the pressure is removed.(USP02050032)
$$ The bridge portion 145 would however be typically left in position where a patient had few upper teeth or no upper teeth at all.(USP6355049)
$$ They may be required to start placing pieces at a starting position which may be equidistant from and parallel with the finishing lines.(USP01054795)
目次はこちら
POST
POWER-UP 電源投入・電力上昇
POWER CONSUMPTION 消費電力／電力消費
POWER (動詞） 電力（動力）を供給する・給電する
POTENTIAL
POSITION (名詞)
POWER-UP 電源投入・電力上昇
POWER CONSUMPTION 消費電力／電力消費
POWER (動詞） 電力（動力）を供給する・給電する
POTENTIAL
POSITION (名詞)
※このブログではブログの持ち主が承認した後、コメントが反映される設定です。