特許英語例文集

　　　　　　　　　　　　　　　　　　　　　　　　目次はこちら

PRESSURE 圧力

$$ The grub screw 12 applies pressure to, for example, an inner wall of the groove 3. (USP7578245)

$$ The chilled, pressing head 216 applies pressure to the bottom closure and simultaneously extracts heat from the thermoplastics thereof. (USP5651235)

$$ The generation of steam in the head space 15 from the foodstuff 5 results in a pressure increase within the sealed container 10. (USP01014366)

$$ Preferably, and as illustrated, the seal 170 is a V-seal such that its sealing ability increases as the differential pressure increases. (USP6880575)

$$ Minor modifications were made as required to allow the system to operate at reduced pressures, in some examples. (USP02038049)

$$ The solution was filtered through silica and concentrated under reduced pressure. (USP5739332) 減圧下

$$ This opens the valve 2002 enabling air to escape from the compartment 1915 under positive pressure provided by the elastic fibres of layer 1911. (USP6585162) 正圧 -->負圧

$$ The same effect is obtained by applying an underpressure (suction) at port 3.4. / これと同じ効果が負圧（吸引作用）をポート３．４のところに適用することにより得られる。 (USP6474569)

$$ The encapsulating resin may be applied under pressure or by simple immersion depending upon the suitability and fluidity of the particular resin. / 封入樹脂は、加圧下で、あるいは特定の樹脂の流動性及び適合性に依存する単なる浸漬により、塗布してもよい。 (USP6699767)

$$ The pressure contact of the plungers 26 with the hole wall 28 effectively steers the drillbit in the required direction upon recommencing rotation of the drillstring and applying weight thereto.(USP5421421) 圧接(pressure contact)

$$ A friction roller (7) for driving the rotary element (6) is supported on a mounting (8) that is pivoted on an axis (9) and biased about the axis (9) to hold the friction roller (7) in pressure contact with the rotary element (6).(USP5415055) 圧接(pressure contact)

$$ ...biased in a direction such as to bring the friction roller (7) into pressure contact with said surface...(USP5415055) 圧接(pressure contact)

$$ The ratio of the highest pressure, i.e. that at which the raw gas is fed to the adsorber during the adsorption step, to the lowest pressure is preferably in the range 8 to 25, particularly 10 to 15.(USP4778670) high ~;大きな圧力

$$ The material exerts considerable force on the front of the ring such that although the screw angle of the short limbs is shallow, the ring moves back and turns so that the pins enter the short limbs--see 43B in FIG. 8. / 材料は、リングの前方に大きな圧力を及ぼし、それによって、短リム部のスクリュー角が浅いにもかかわらず、ピンが短リム部に入るようにリングが逆方向に移動し、回動する(図８の４３Ｂ参照)。(USP6287494)

$$ Touch pads and touch screens responsive to localized depression pressure have been provided to create "buttons" for data input.(USP4914624)

$$ However, the end seals normally employed are capable of withstanding only slight pressure, i.e., of the order of 10 to 15" H2O. / しかしながら、端部シールは通常、僅かな圧力、例えば10から15インチＨ2Ｏに耐えられるだけである。(USP5402724)

$$ ...the electrode assembly 32 is applied with light pressure at the selected operation site... (USP6056746)

$$ The algorithm was applied with target bit rates of 10k bits/s, 28.8k bits/s and 64k bits/s with the quality and threshold factors set according to Table 3. (USP6990246)

　　　　　　　　　　　　　　　　　　　　　　　　目次はこちら