特許英語例文集

　　　　　　　　　　　　　　　　　　　　　　　　目次はこちら

ENGAGEMENT ~ with sth; ~ between A and B (sths);

$$ The driven wheels can be manually raised to be out of engagement with the rails such that the tray can become free moving in the event of a motor failure. / モータの故障時には、トレイを移動自由にするために、駆動車輪を手で持ち上げてレールから離脱させる。(USP7090586)

$$ The valve body may make an axial guide sliding engagement with adjacent fixed structure of the valve arrangement to maintain its axial orientation in the draw path. / バルブ本体は、当該バルブ配列の隣接固定構造部と一緒に、軸方向案内摺動係合部を形成し、引抜き通路において該係合部の向きを軸方向に保持する。(USP6422434)

$$ It will be appreciated that there are four possible thread engagement start positions, spaced apart by angles of 90°. (USP5411157)

$$ By virtue of the left hand thread engagement between the stabiliser sleeve 7 and the bottom nut 3 loosening of the sleeve 7 relative to the nut 3 during a drilling operation is avoided. (USP4844179)

$$ Both pins 56 and 58 are spring-loaded in a radially inward direction, and are held out of engagement, against the spring pressure by the engagement of the pegs 70 in the tracks 74, 76. (USP6598724)

$$ The upper and lower parts 10a, 10b of the coupling are thus held in mutual engagement. (USP02066557)

$$ Additionally, the control valve member 42 is in engagement with the second valve seating 52b such that the control chamber 62 communicates with the supply passage 15. (USP01035464)

$$ The actuator may be an electrical, hydraulic or electro-hydraulic actuator operatively connected to a latch which releasably holds two parts of the coupling in engagement with each other. (USP02066557)

$$ The mail piece is located in a required position in engagement with guides and the print head is traversed across the mail piece. (USP02021931)

$$ A coupling as defined in claim 6, comprising two parts releasably held in engagement with each other by collet fingers, the BOP closure elements acting upon the collet fingers to cause the disconnection. (USP02066557)

$$ The shuttle moves between the teeth 447 and cam follower 448 and is caused to rotate by engagement between teeth 447 and cam follower 445 and by engagement between teeth 445 and cam follower 448.(USP02074809)

$$ Engagement between the outer tapered surfaces of the collet segments and the corresponding inner taper of the tube results in inward radial movement of the collet segments so as to grip the workpiece.(USP5524909)

　　　　　　　　　　　　　　　　　　　　　　　　目次はこちら