QRコード
QRCODE
お知らせ
アクセスカウンタ
読者登録
メールアドレスを入力して登録する事で、このブログの新着エントリーをメールでお届けいたします。解除は→こちら
現在の読者数 44人

脱落

2019年06月09日

 車馬駄馬田 at 08:00 | Comments(0) | 
                        目次はこちら

脱落

$$ Thus the retaining ring 86 ensures that the ball 104 cannot drop out of the socket if the crane cable goes slack. / このため、リテーナリング86は、もしクレーンケーブルが弛んでも、ボール104がソケットから脱落しないよう保証する。(USP8313131): drop out

$$ The pins have nuts screwed onto their distal ends which prevent the locking plate 76 from falling off. / ピンは、その遠位端にねじ込まれたナットを有し、これらのナットは固定プレート76が脱落するのを防止する。(USP8313131): fall out

$$ If the e-mail is so badly formed that part of it cannot be rewritten, then it is determined whether a reasonable e-mail still exists if the non-conforming part were missing. / 電子メールが、その一部を書き直すことができない程に、まずく形成されている場合、不一致部分が脱落しても筋の通る電子メールがまだ存在しているかどうかが判定される。(USP8185954): miss

$$ In order to retain the rivets in the tubes a cut-out tab 120 is formed at one or both ends of the tube 90 so as to close interior channel 121 at least partially thereby preventing escape of the rivets 50. / チューブ内にリベットを保持するために、チューブ90の一端または両端に、カットアウト・タブ120が構成される。これにより、少なくとも部分的に内部チャンネル121が閉じられ、リベット50の脱落が防がれる。(USP6692213): escape

$$ The advantages of glass-ionomer cements include their adhesion to tooth tissue, thus allowing the use of conservative techniques, and sustained fluoride release, thus imparting to the tooth an increased resistance to acid demineralisation. / グラスイオノマーセメントの利点には歯組織に接着することが含まれる。このため従来の技術を用いることができ、フッ化物遊離を維持することができ、これにより酸による無機質脱落に対する歯の抵抗が増す。(USP6313192): demineralisation

$$ For example, in some applications such as video conferencing a slight loss of information content can be tolerated to enhance compression efficiency, whereas in data file transfer it is important to maintain the complete information content of the message. / 例えば、ビデオ会議のようなアプリケーションのなかには、圧縮効率を高めるために若干の情報内容の脱落を許容し得るものがあるのに対し、データ・ファイル転送では、メッセージの完全な情報内容を維持することが重要である。(USP5454079): loss


                        目次はこちら


タグ :脱落

同じカテゴリー()の記事
 待ち時間 / 待機時間 (2020-05-07 08:00)
 分(ぶん) / だけ (2020-03-26 08:00)
 短絡 (2019-07-03 08:00)
 断面形状 (2019-07-02 08:00)
 断面 (2019-07-01 08:00)
 端面 (2019-06-30 08:00)

※このブログではブログの持ち主が承認した後、コメントが反映される設定です。
上の画像に書かれている文字を入力して下さい
 
<ご注意>
書き込まれた内容は公開され、ブログの持ち主だけが削除できます。