QRコード
QRCODE
お知らせ
アクセスカウンタ
読者登録
メールアドレスを入力して登録する事で、このブログの新着エントリーをメールでお届けいたします。解除は→こちら
現在の読者数 41人

基準となる

2018年05月03日

 車馬駄馬田 at 08:00 | Comments(0) | 
                        目次はこちら

基準となる

(REFERENCE)
$$ The servo track pattern becomes the master reference which is used by the disk drive during normal operation in order to locate the tracks and sectors on the disk for data storage and retrieval. / サーボトラックパターンは、通常の動作中に、データの格納および検索のためにディスク上のトラックおよびセクタを位置決めするために、ディスクドライブによって使用されるマスタ基準となる。(USP6172830)

$$ U.S. Pat. No. 5,448,429 discloses another example of a system for writing clock tracks across a disk in which a written clock signal is read to provide a reference for the writing of the clock signal to a subsequent track. / US-A-5448429は、ディスクにクロックトラックを書き込むシステムの別の例を開示しており、そこでは書き込まれたクロック信号が読み取られ、後続トラックにクロック信号を書き込むための基準となる。(USP6172830)

$$ As already explained, in order to facilitate transmission of a television or video image which has been generated with reference to the red, green and blue colours, the parts of the image are represented in a form other than with reference to the red; green and blue colours. / 上述のように、赤、緑、青を基準として生成されたテレビジョン画像又はビデオ画像情報の伝送を容易にするために、画像の一部を赤、緑、青を基準とする情報以外の形式で伝送することがある。(USP6614489)

$$ Hereinafter, the position of the user terminal 44 is defined with reference to its distance along the ground track 48 and its distance along the cross track 54 with reference to the nadir 50. / これ以降、使用者端末44の位置は、(最下点50を基準とした)地上軌道48に沿った距離と交差軌道54に沿った距離とを参照して、定義される。(USP6031489)

(OTHERS)
$$ Furthermore, this date is generally only a reliable measure if the primary packaging is in an unopened state and the product has been stored properly. / 更に、この日付は通常、一次包装が未開封の状態であり、そして製品が適切に保管された場合においてのみ、信頼性が高い基準となる。(USP8104949): measure

$$ A pulse train indicative of rotor position relative to the stator is generated and supplied to control circuitry, allowing accurate phase energization. / 固定子を基準とする回転子位置を示すパルス列が生成され、制御回路に供給され、正確な位相の通電を可能にする。(USP6586903): relative


                        目次はこちら


タグ :基準となる

同じカテゴリー()の記事
 反比例(逆比例) (2020-01-21 08:00)
 切欠・切欠き・切り欠き (2019-03-06 08:00)
 均等 (2018-06-07 08:00)
 近接 (2018-06-06 09:00)
 均一 (2018-06-05 08:00)
 極めて (2018-06-04 08:00)

※このブログではブログの持ち主が承認した後、コメントが反映される設定です。
上の画像に書かれている文字を入力して下さい
 
<ご注意>
書き込まれた内容は公開され、ブログの持ち主だけが削除できます。