FOR THIS TO-V / IN OREDER FOR THIS TO-V
2017年08月31日
車馬駄馬田 at 08:00 | Comments(0) | for...
目次はこちら
FOR THIS TO-V / IN OREDER FOR THIS TO-V
$$ For this to occur, the noise reduction component of the composite signal S must have a magnitude which is substantially equal to that of the incoming noise signal, and it must be of substantially opposed polarity (that is, inverted, or 180° shifted in phase with respect to the noise signal). / これが起こるためには、複合信号Ｓの雑音低減成分は、入力雑音信号の大きさにほぼ等しい大きさを有していなければならず、また、実質的に反対の極性を有していなければならない（すなわち、反転され、あるいは、雑音信号に対して１８０°位相シフトされる）。(USP8165312)
$$ In order for this to work an accurate integration path is required for coherent summation of the acoustic wavefronts. / これが動作するさめには、音響波面の一貫性のある加算のために正確な統合経路が要求される。(USP7124022)
$$ It appears that, for this to occur, the fibre operates as a multimode waveguide. / これを行うため、ファイバは多モード導波体として動作するように思われる。(USP5903685)
$$ For this to be possible, the wanted sources must lie in different directions to the interfering sources relative to the sensors, so that response nulls are steerable towards interfering sources and lobes towards wanted sources. (USP6452988)
$$ In order for this to be possible in the mesh described above, antennas should be aligned to their positions for both T1-1 and T1 simultaneously. (USP02042274)
目次はこちら
FOR THIS TO-V / IN OREDER FOR THIS TO-V
$$ For this to occur, the noise reduction component of the composite signal S must have a magnitude which is substantially equal to that of the incoming noise signal, and it must be of substantially opposed polarity (that is, inverted, or 180° shifted in phase with respect to the noise signal). / これが起こるためには、複合信号Ｓの雑音低減成分は、入力雑音信号の大きさにほぼ等しい大きさを有していなければならず、また、実質的に反対の極性を有していなければならない（すなわち、反転され、あるいは、雑音信号に対して１８０°位相シフトされる）。(USP8165312)
$$ In order for this to work an accurate integration path is required for coherent summation of the acoustic wavefronts. / これが動作するさめには、音響波面の一貫性のある加算のために正確な統合経路が要求される。(USP7124022)
$$ It appears that, for this to occur, the fibre operates as a multimode waveguide. / これを行うため、ファイバは多モード導波体として動作するように思われる。(USP5903685)
$$ For this to be possible, the wanted sources must lie in different directions to the interfering sources relative to the sensors, so that response nulls are steerable towards interfering sources and lobes towards wanted sources. (USP6452988)
$$ In order for this to be possible in the mesh described above, antennas should be aligned to their positions for both T1-1 and T1 simultaneously. (USP02042274)
目次はこちら
※このブログではブログの持ち主が承認した後、コメントが反映される設定です。